Home / Home Projects / 7 Do it Yourself Home Improvement Projects That Could Save You a lot of Money
seven-do-it-yourself-home-improvement-projects-that-could-save-you-a-good-amount-of-money

7 Do it Yourself Home Improvement Projects That Could Save You a lot of Money

Today, we have crafted seven do it yourself home improvement projects that could save you a lot of money through energy conservation. As a part of our efforts to guide you in how to be efficient in your energy consumption and save money on electricity bills, we created a section of projects that you can do yourself at home. These DIY home improvement projects can be done while applying common tips and tricks to help you make the most of your home. Here you can find the right answers to frequently asked questions from people who make their own home improvement projects. Along with a few easy-to-follow projects that you can do yourself that could help you reduce your energy consumption while saving you a lot of your hard-earned money.

energy_use_in_homes

Source: eia.gov

Do it Yourself Home Improvement Project Guides to Conserve Energy and Save Money

It does not matter how much experience you have in home improvement; We have seven great DIY projects that you can do yourself at home. These seven projects are quite quick and easy to complete. These home improvement projects can help increase the energy efficiency of your space. Try these projects and you will be on your way to become an expert in DIY projects to improve energy efficiency in the home.

Do it Yourself Home Improvement Projects

  1. How to seal air leaks with a putty
  2. Adding weather-stripping to all exterior doors
  3. How to turn a ladder into a laundry rack
  4. How to create an airflow blocker for your door – Draft door stopper
  5. How to apply a protective window film to block the sun
  6. How to insulate hot water pipes
  7. How to build your own rain barrel to save water and money

DIY Home Improvement Project 1: How to seal air leaks with a putty

Difficulty of the project:

Easy

Estimated energy savings:

5-20%

Estimated Time For Complete Project:

1 to 2 hours

Required Items:

Putty gun, putty, spatula, rigid brush or large screwdriver, paper towels or cloth.

A normal family residing in the United States spends almost $ 2,000 per year on energy bills of electricity and gas.

US Department of Energy

http://energy.gov/energysaver/do-it-yourself-energy-savings-projects

How to seal air leaks with a putty

When you’re spending that big of an amount, then it’s essential to make sure that this money is not being wasted. Most of the people do not give proper attention to air leaks inside their homes. These leaks are a cause of inefficiency as far as these heating and cooling systems are concerned. People mostly prefer houses with a lot of doors and windows. This being a good practice to allow natural sunlight and air to ventilate and illuminate our homes. However, if these windows and doors are not properly sealed, they can become a nightmare towards your energy spending. The more prone your house is towards air leaks, the costlier it becomes to keep it cool in summers or hot in winters. Apart from these air leaks, proper maintenance of heating and cooling systems is also essential to make sure that they are working at an optimum capacity. Worn out energy appliances consume a lot of electricity and in return very less efficiency. So, your needful eye is required to maintain and or replace such appliances, which are becoming a constant stress on your pocket.

If you go towards an entire replacement exercise, which includes not only doors and windows, but also your energy appliances, then its something that would cost too much. Hence going towards more economical solutions, we can try a do it yourself home improvement project of sealing all the air leaks using a putty.

Therefore, take out your putty gun and spend an hour or so sealing all the air leaks in your house. You will be surprised how a small effort can make a significant difference in the amount of energy consumed in your home. With the following steps, taken from a US Department of Energy project that you can do yourself, you can start easily.

Step 1:

Clean all areas where you must apply putty. Use a spatula, stiff brush or large screwdriver to remove old putty and paint. It is important to make sure that the area is completely dry before applying putty so as not to seal moisture inside.

Step 2:

Cut the tip of the putty tube at a 45-degree angle and insert it into the caulking gun. If this is the first time you’re using a putty gun, practice applying putty on a paper towel first.

Step 3:

Hold the caulking gun at a 45-degree angle against the clean, dry edge that you want to seal. Press the trigger of the putty gun and with a backward movement slide the nozzle along the window seal. Putty should immediately get into the crack when exiting the tube, if you are applying it correctly.

Step 4:

After applying it for every two feet, push the putty you just applied into the crack with a wet finger, knife or any other sharp object.

Step 5:

Use a damp cloth to wipe off any excess putty immediately, because it is difficult to remove it once it dries.

Typically, putty dries completely in 12 to 24 hours, depending on air temperature and humidity. Read the instructions on the package for further details.

If you’re not sure which windows or areas you have to seal with putty, then try holding a lit candle near the place where you think there may be cracks. You’ve to do this process on a windy day. If the flame moves towards you, it is most likely that the air is passing through a crack on the window or door. You can concentrate your caulking efforts in those areas to get perfect results.

DIY Home Improvement Project 2: Adding weather-stripping to all exterior doors

Difficulty of the project:

Easy

Estimated energy savings:

5-10%

Estimated Time For Complete Project:

1 to 2 hours

Required Items:

Screwdriver, hammer, tinplate cutter, door sweeper, self-adhesive foam weather stripping kit

How to place weather strips on exterior doors

Did you know that there may be air leaks in the exterior doors of your home even when they are closed? Placing weather-stripping on the exterior doors of your home is a simple and effective way to keep energy costs low and help you save money on utility bills each month. Not only that, this home improvement project can save your house from the unwanted insects and germs.

In order to seal a door properly, two things are required as essential components. First being the weather-stripping that will cover all the edges of the door frame. The second component is a door sweeper, which is utilized to cover the gap between the bottom of the door and the threshold. Another important thing to consider before starting off with the weather-stripping is to ensure that your door properly fits its frame. Make sure that the hinges are tight, and if they’re not, you can use a screwdriver to tighten them up. However, if you notice bigger or wider gaps between the door and its frame, then you might start with applying weather strips on your door. Make sure that it doesn’t blow any air after your application is complete.

The Us Department of Energy has come up with detailed instructions regarding the proper application of weather stripping on your doors. Carry on reading if you want to know the complete instructions. Very detailed process for application of weather stripping for energy efficiency is also mentioned on energy.gov website. Not only will you save money every month on utility bills; You will also keep your family warm in winter and comfortable in summer.

Step 1:

Determine how many weather-strips are required to cover each of your door. To do this, add the measurements of all the doors where you plan to place them and add an additional 10% extra just in case.

Step 2:

Thoroughly clean all moldings with soap and water and let them dry completely before placing the weather stripping.

Step 3:

Start cutting the self-adhesive foam so that it fits each edge of the door frame.

Step 4:

Remove the paper from the rear-side of the foam and firmly press it into the inside of the molding.

Step 5:

Cut the sweeper according to the width of the door.

Step 6:

Close the door and screw the sweeper so that the bottom of the sweeper touches the ground.

DIY Home Improvement Project 3: How to Turn a ladder into a laundry rack

Difficulty of the project:

Easy

Estimated Time for Completion:

3 to 4 hours

Items Required:

An old ladder preferably wooden, tools and materials for sanding, paint or spray paint materials, six screw-hooks (two of them would be used to attach the ladder with the ceiling, four would be applied to the staircase), hanging shower curtain hooks by the sides of the stairs (you will choose the number depending on your need), chains (4), which can be bought from any hardware store.

How to Turn a Ladder into a Laundry Rack

An important fact to consider in the start of starting this do it yourself home improvement project is that nearly 6% of the entire electricity consumed in the US each year is through laundry dryers. These figures are provided by a study published in California Energy Commission. Along with this, if you want your clothes to have a prolonged life, then drying them up in a dryer is not always the perfect option. Dryers damage clothes hence reducing their life, and increasing your spending. Therefore, if you opt for this easy do it yourself home improvement project, you’d be able to use a stylish old wooden ladder, specifically redesigned for this purpose. You can find DIY home project ideas and steps to create this laundry rack by using an old ladder anywhere, however, we’ve tried our best to simplify the steps. This would help you complete this home improvement and energy conservation project easily and neatly through the comfort of your home.

Once this DIY project is complete, your laundry rack ladder would hang parallel to the roof. This laundry rack can be placed in small places where there is very little or no space to dry the clothes on the floor. Apart from adding a certain charm to your room, this DIY is also an excellent way to save your clothes from the damage caused by dryers, and also to save a lot of your electricity-spendings.

Its advised to go ahead with steps one through three before starting with the room, this would give enough time to the paint and allow it to dry. It is entirely your choice, whether you want to paint the staircase or not. You can also do it at any other day, making the project very easy and requiring a lot less time to complete.

Step 1:

In order to start, gather all the required items and give your first thoughts towards the ladder. You can use a sandpaper to remove strains of old paint from the ladder. It would also help to smooth out the wooden surface and remove any lumps.

Step 2:

Now it time to paint your ladder. Choose a color of your choice and apply a coat of paint. Allow it dry. There is no need to use varnish, as it will get damaged once you place wet clothes over it. Choose a nicely ventilated area to start the painting process. Paints are water-proof and won’t allow the wood to be damaged due to wet clothes.

Step 3:

You can use hooks if you want to increase the number of clothes you want to dry on your ladder. The hooks would look mind-blowing if you paint them in contrasting colors. The chain that you bought from the hardware store can also be painted with a color of your choice. This chain would be used to hang the ladder from the ceiling.

Step 4:

If you painted the shower curtain hooks, give them some time to dry up. Once they’re dried, hang them separately on the steps of the stairs. You can also use the stairs directly to dry out clothes, however, if you apply a few hooks here and there, they would provide you an option to hang more clothes at the same time.

Step 5:

If you want to hang your drying rack ladder from the roof, you need to place four more hooks on the ladder. Do keep in mind the center of gravity of the ladder, and evenly distribute the distance between all four hooks. This would allow you to balance the ladder, without a chance of it falling one way or the other. The best combination is two on each side and they must be parallel to each other.

Step 6:

Use the chains and fasten them over the screw-hooks that you placed on the ladder. If you want the chains to be less noticeable, then it’s ideal to paint them with the color of your ceiling.

Step 7:

Take the two remaining hooks and screw them on the roof. Now hang two chains from one end of the ladder to a hook and the other two chains from the other end to the second hook. Make sure the hooks you buy are durable enough to support the weight of the ladder.

Step 8:

Finally, hang the ladder from the roof with two chains per hook.

Another option which is even simpler than the one described above is to recline the laundry rack ladder against the wall, instead of hanging it from the ceiling. In this case, you leave out steps 5 to 8.

DIY Home Improvement Project 4: How to Create an Airflow Blocker for Your Door – Door Draft Stopper

Difficulty of the project:

Easy

Estimated Time for Completion:

One hour (depending on your level of creativity)

Items Required:

Measuring tape, cloth, padding, polyester, corn or rice grains, thread and needle, sewing machine or ribbon to join fabrics if you do not like sewing

How to create an airflow blocker for your door – door draft stopper

Most houses have or have had exterior doors through which air leaks through cracks and joints. Not only is this a waste of energy that could increase your utility or electricity bill; It also makes your home less comfortable. There are several current blockers (also called door snakes, draft guards, draft busters, etc.) that you can buy for $ 10 to $ 20. But we are here to share some DIY home improvement tips that wouldn’t take more than hour to address this problem. Therefore, take out a little time to create a blocker that matches your personal style and the decoration of your home.

Thanks to the abundance of websites for home improvement and crafts, there are many DIY project ideas that provide step by step instructions to complete any home project yourself. This is one of the easiest ways and it would probably awaken your creative aesthetics. The whole family can participate in this project: everyone can create and decorate their own door draft stopper. Once you have decided on the style you want to follow, gather your materials and follow these steps. Your house will be free of drafts (and will have more style) quickly.

These instructions are our super-simplified version of this popular project.

Step 1:

Measure the base of each door through which current enters. If you use fabric, cut it off the length of your door, adding an inch for the seam and nine inches for the width.

Step 2:

Iron the fabric before folding it.

Step 3:

Fold it in half lengthwise, with the inside out. Join the folded fabric with pins and stitch the long side together with pins, leaving about half an inch. Make sure you re-sew both ends to strengthen the seam. If you prefer, you can use ribbon to join fabrics.

Step 4:

After having sewn the fabric lengthwise, sew or tape one end (check the seam at both ends) and turn it so that the correct side of the fabric is facing outward.

Step 5:

Insert the filler into your blocker and make sure you leave enough space for sewing, gluing the closed blocker with rubber or tape. Make sure about half of the stuffing is made of fluffy material such as polyester or pillow stuffing and another half a heavier material such as rice, beans or corn. With this you will make sure that the blocker does not move.

Step 6:

Close the final end with thread and needle, cloth glue or whatever you prefer.

DIY Home Improvement Project 5: How to Apply a Protective Window Film to block the sun

Difficulty of the project:

Easy

Estimated Time for Completion:

1 to 2 hours depending on the number of windows

Items Required:

Window cover, thumbtack, spray bottle, glass cleaner or squeegee

How to apply a protective window film to block the sun

Our next do it yourself home improvement project that would save you a lot of money is about applying a protective film on your windows. Placing a protective layer on the windows of your home is intelligent for several reasons. First of all, the protective layer for windows helps block unwanted heat and ultraviolet rays (up to 99%) so that they do not enter through the windows, which increases the energy efficiency of your home and could save you money in public services.

In addition, the protective layer for windows gives additional privacy to any room, attenuates the exterior lighting at night and early in the morning and complements the lighting you already have.

The instructions for applying film to windows range from very simple to incredibly detailed. In the following steps we simplify everything possible, but we offer specific guides when a difference is achieved with them. If you’re not careful, you could end up with bubbles and a protective layer that comes off. Window film is not very easy to remove, so it is good to apply it well the first time.

Step 1:

Use a solution of soapy water (without vinegar or ammonia) to clean the windows. Some home improvement experts recommend a solution of 1 teaspoon of baby shampoo in 1 gallon of filtered water to keep the windows as clean as possible.

Step 2:

Cut the layer into chunks approximately 1 in. larger than glass.

Step 3:

Re-spray the soapy solution you used to clean the window and remove the back of the piece of the layer you are going to apply.

Step 4:

Start applying the layer at the top of the window and go down. Keep the surface of the layer wet, so you can easily flatten it with the glass cleaner or squeegee.

Step 5:

Once you have placed the protective layer over the entire window, use the thumbtack to trim it, leaving a space of approximately 1/16 inch. between the edge of the layer and the window.

Step 6:

Use the squeegee to push all the air bubbles towards the edges. Spray more solution on the protective layer if necessary for the process to work well.

Repeat the steps for each window.

DIY Home Improvement Project 6: How to Insulate Hot Water Pipes

Difficulty of the project:

Medium

Estimated energy savings:

3% -4% per year on the hot water bill (approximately $ 8- $ 12)

Estimated Time for Completion:

2 to 3 hours depending on the size of the house

Items Required:

Measuring tape; Fiberglass pipe or insulation covers from hardware store, gloves and sleeves / long pants, scissors, tack, tape, wire or cable ties

How to insulate hot water pipes

Along with heating and cooling the home, heating water is usually the second largest energy expenditure in homes (US Department of Energy). If your hot water pipes are not insulated, they are not working as efficiently as they could. This forces your water heater to work harder and your electricity bill goes up.

Some energy efficiency consultants will tell you to hire someone (that is, the consultant) to insulate all the pipes at your home. However, in most homes, the task is pretty simple and can be done yourself. Keep in mind the following steps to isolate the water pipes yourself. At the most it will take you a few hours and you will notice the change almost immediately. When you turn on the tap, you will not have to wait so long for the water to warm up. Probably your electricity bill will go down just a few dollars per year, but those dollars accumulate over time. Also, you will not have to let the water run so long to warm up so you can also save on your water bill. These benefits, combined with faster access to hot water, make this small DIY arrangement worthwhile.

You can also reduce your energy costs by keeping track of how much hot water you use, and trying to use less. We recommend simple tasks such as repairing faucets with leaks, making low-flow installations and using energy-efficient appliances throughout your home.

You can find instructions for this project in many places, but the recommendations of the US Department of Energy, simplified and explained below, are the easiest and safest we can find.

Step 1:

Make sure there are no leaks in the pipes and that they are completely dry before starting.

Step 2:

Measure the length of the pipes starting at the water heater to determine the amount of insulation you need. Be sure to measure all accessible hot water pipes, especially the first 3 feet from the water heater.

Note: If you have a gas water heater, do not place insulation of any kind within 6 inches of the burner. For your safety, if the pipe is 6 to 8 inches away from the burner, use a cover for fiberglass pipe (at least 1 inch thick) without coating. Otherwise, use covers for common pipes. 3

Step 3:

Cut the pipe cover or insulation to the required length.

Step 4:

Place the pipe cover with the side of the joint pointing towards the pipe.

Step 5:

Adjust the pipe cover by attaching tape, wires or cable ties, approximately every two feet.

DIY Home Improvement Project 7: How to Build your own rain barrel to save water and money

Difficulty of the project:

Medium

Estimated Time for Completion:

2 to 3 hours

Items Required:

1 barrel, Teflon tape or waterproof sealant, 2 rubber washers, 2 metal washers, 1 hose clamp, 1 valve, 1 drill, garden cloth

How to build your own rain barrel to save water and money

According to Better Homes and Gardens, up 300 gallons of water can be stored in a rain barrel for every inch of rain that falls over an area of 500 sq. foot. If this water is somehow collected, it could allow us to store and consume more than one thousand gallons of water each year.

Each year, we spend a lot of money towards our water needs by consuming tap water. In order to safe this hard-earned amount of money, we can utilize rain water. The advantages of rain water are numerous, they range from it being best for the earth and your plants to being highly oxygenated. Tap water usually has a lot of contamination, which are not present in rain water. Therefore, if you want to use rain water to water your plants or wash your cars, it is the best and most sustainable way. Another interesting perspective: a barrel of rain will force you to evaluate your family’s daily water consumption, so you may also notice other areas where you can keep.

If you still do not have a keg, check out online stores, local exchange boards for recycling or nearby car washes. You can even use a sturdy trash can instead of a barrel. Pre-made rain barrels can be expensive, so if you prefer to be more eco-friendly and do it yourself, follow the steps below to make your own rain barrel. You will save water immediately.

The following steps use a large trash can as a barrel. However, you can find other variations.

Step 1:

Choose a location for your rain barrel directly below the drain of your house, so that the water flows easily into the barrel. Be sure to place the barrel on a flat and strong surface or platform; A full rain barrel can weigh more than 450 pounds.

Step 2:

Drill a hole for the valve near the bottom of the barrel. Make sure you leave enough space to fill the shower easily.

Step 3:

Take a metal washer and place it on the threaded end of the valve and then a rubber washer over the threads, so that the washer is in place and does not drip.

Step 4:

Apply a good amount of sealant to the rubber washer and insert the valve into the hole. Once the sealant is dry, place a rubber washer on the inside of the barrel and then a metal washer on the valve threads. Adjust the valve inside the barrel with the clamp so that it does not move.

Step 5:

Drill a hole in the lid of the rain barrel, making sure it is just below the drain of your house. Make a couple of holes near the top of the rain barrel so that the water can overflow.

Step 6:

Seal the top of the barrel with a piece of gardening cloth and place the lid on top to secure it. This barrier will prevent mosquitoes and other insects from contaminating your rainwater, but will allow water to enter the barrel and overflow as needed.

Enjoy this do it yourself home improvement project with your own water and many additional savings.

Frequently Asked Questions About Do it Yourself Home Improvement Projects for Energy Efficiency

Question: For what home improvement projects to save energy should I call an expert, and what can I do myself?

Answer: Some projects require the hands of a professional expert primarily for safety concerns. These projects include but are not limited to electricity projects or project that require significant changes to the structure of the house or a room. If your work is related to an area that, such as the bathroom (where there are electrical wires and water present), then it could pose a serious safety risk. In this case, the law requires that you hire a licensed expert electrician. In addition to exposing you towards the risk of an injury, trying to complete such a project, which a licensed professional should handle could cause damage to your home and increase project costs. Always be careful when entering the attic or access the spaces that are poorly lit, they could also be pretty dangerous.

On the other hand, there are many home improvement projects that you can do yourself, they allow you to save a lot of money and feel fulfilled. The smaller level DIY beginner home improvement projects that are targeted towards improving your home décor and appearance along with increasing energy conservation are excellent projects to make improvements in the home yourself. For example, you can opt to fill the spaces on the sides of your windows and doors with putty, or make a draft blocker to stop drafts in doors pretty easily and in a decorative style.

Question: Can you renovate or remodel rented properties?

Answer: Most owners do not allow changes in rented homes, therefore, it is essential that you talk to your owner before thinking to start any remodeling project. You can also take help of your rental agreement to see if it allows you to carry out minor changes. Sometimes agreements and landlords allow you to do changes that are reversible when you move; for example, paint a wall.

The most appropriate task that you can undertake at a rental property is a small DIY home improvement or energy efficiency project. Do make sure that this project doesn’t change or alter the rental property in any way. An excellent DIY home improvement project would be to make a drainage block under the door, which will help you retain heating and cooling retained in desired areas and reduce currents. Another project that you can carry out at a rental property is to create a cloth drying rack using an old wooden ladder. Both projects are entirely explained above.

Question: Are DIY home improvement projects worth your efforts and time?

Answer: The same can be said of almost any task or project, do it yourself home improvement projects have advantages and disadvantages. One of the positive aspects is that the owners can get benefits from buying the materials in local stores to complete their own DIY projects to reduce costs. You do it at your own time, enabling you to decide which time suits you the best. Moreover, they allow you to develop habits that are quite handy and helpful when you don’t have any expert help around.

Similarly, there are a few negative aspects of carrying on these home improvement projects yourself. One downside is that sometimes, if you’re not able to pre-determine the accurate amount of time and expertise needed for the completion of a DIY project, you can end up spending or wasting a lot of money. Another aspect is related to your skills as a DIY handyman. If you’re somehow not able to carry out the step by step instructions provided with each DIY project, then there’s a chance that the end result is not desirable. Depending on your speed of carrying out a project, it might take a lot of time if you’re slow. Therefore, if you need any home improvement project to be completed within a specific span of time, it better to take expert help, rather than carrying it out yourself on a short deadline. The bottom-line is that if you’re inclined towards saving money and keeping yourself busy in household tasks and DIY projects, then its best to carry them out yourself. In the end, it is all a matter of interest and skills.

The current status of your home and how much work is required to complete a DIY home improvement project will determine the amount of money and energy that you’ll end up saving after its successful execution. Depending on the pre-conditions, some people are required to make very minor changes to see significant results and savings. However, some people have to go through a lot of effort in order to save energy and reduce your electricity bills. In order for all these DIY home improvement chores to be fun and interesting to work on, you need to choose the one’s that would make a lot of difference. It is an interesting practice to make a record of how many changes, if any, are there in your consumption and energy costs in the months after you carry out a DIY project to save energy. These results would allow you to better determine what other projects you should carry out, the one’s that could make a lot of difference.

Question: What energy efficiency projects for DIY home improvement are best for me?

Answer: The internet is full of tips and tricks that would allow you to save energy. However, do make sure that the project you choose to start is related to the conditions where you live. It is not essential that if a project helped someone else, it would also help you. You’ve to determine the costs, your region, your electricity requirements, and technical feasibility before carrying out any specific do it yourself home improvement project.

  1. Understanding the project scope of the improvements that you want to undertake and comparing it with your skill level is essential before you start.
  2. If you’ve a lot of expertise to carry out these projects yourself, then its nothing to worry about. However, if its your first time, then try to start small. Pick out the smallest project and carry it out just to see how it works out for you. Don’t forget to review the results on energy savings before starting the next one.
  3. It’s good if you evaluate your entire home and get to know where maximum amount of energy is being wasted. Many companies offer a paid or free checkup to conduct an analysis of how energy is being consumed in your home. There are a number of factors that you must consider in order to get the best results of any energy saving DIY project. These factors include your personal electricity habits, the climate that you’re living in, and the materials which are used to build your home. If you develop a better understanding about where your energy is being consumed, then it can help you choose the most suitable projects for you.

After you develop a perfect scope of ​​what you can do yourself and the home improvement tasks that could really make a big difference in your particular type of home, you can start testing small projects first (and also test your own thought about things that could create an impact).

For example, you must have an idea that LED lighting saves a lot of electricity. You can start off by replacing all the lights of your home to this more energy efficient type. This could be a costly task; however, you have to calculate how much you save in energy bills if you make this investment. After changing all the lights, you can try a simple project provided in the list above. If you carry it out successfully, it is time to start the more difficult one’s. As a conclusion, the best home improvement project that you can start right away is the most simplest one.

Remember that small changes sometimes make a big difference, so start off with these do it yourself home improvement projects to save on those big energy bills.

About Nick Fury

Hi, I am Nick! Apart from being a loving husband and a father of one, I dedicate myself to manage a company full time. Writing is my passion, I started writing a blog some 10 years ago, now reviving this passion again, I would love to express my views and takes on day to day stuff, hope you guys enjoy! Do share your thoughts.

Check Also

smart-checklist-to-make-shifting-easier

SMART CHECKLIST TO FOLLOW TO MAKE SHIFTING EASIER

Jotting essential points down is a prevalent practice as it helps people to remember the …

%d bloggers like this: